بایگانی محصولات | کاربری سازی شایان

Insulated sandwich panel

Introduction of Insulated sandwich panel

In short, insulated containers are a good choice in constructing rooms for urban and interurban loads. They have structural strength and resistance to impact and flexural and shear stresses, heat insulation, and long life.

the isulated container’s body is made of sandwich panels. The injected sandwich panel is made of 4 to 5 cm polyurethane with a double-sided allogenic sheet and coil away from the aluminum corner. The floor is made of steel sheets, and the cover around the doors is PVC insulation with unique rubber. The density of polyurethane materials used is 40 2 2.

The characteristics of sandwich panels include their lightness, high strength, low construction and maintenance costs, high installation speed, and resistance to cold and heat.

Another advantage of using sandwich panels in room construction is reducing the use of consumables. Therefore, it’s obvious that the economic efficiency of using sandwich panels is higher than traditional materials and should be included in everyday affairs as the main alternative to conventional materials.

features of Shayan insulated roofed container

The insulated roofed container comprises a sandwich panel with a polyurethane inner layer and steel outer layers, which are resistant to shear and flexural stresses. Also, the middle layer of polyurethane has made the general structure of this use insulated. Noise, humidity, heat, and it’s refractory and slow-burning significantly impact cargo transportation safety. It also prevents the entry of germs and the growth of fungi, bacteria, and mold.

Polyurethane has compounds of polyol, isocyanate, and gas, which are widely used due to the ease of construction (foam injection into the sheet). The primary color of the lining of the steel strip of the top layer of the sandwich panel used in the insulated roofed containers is the oil painting of the car. The sheets that have fewer protrusions and depressions have been used in their construction. The structure of the chassis and parts used in this room is ST-37 steel truck parts and sections. This steel is known as low-strength alloy steel.

Due to their ease of welding, these steels are widely used in the room industry. The steel structure of the chassis makes this container and high flexibility also have a very lightweight. Also, the high resistance of steel to corrosion and rust is another feature of this chassis. The body and lid of the insulated roof container are insulated with PVC and unique rubber. The insulation of this product prevents loss of energy and the pollutants entry of outside air into the interior. This feature ensures that the perishable material inside the load remains healthy and of good quality.

نام تجاری محصول
کد محصول		SH-RCW-V20
نام فنی محصول		Insulated sandwich panel
مشخصات فنی
جنس بدنه		Sandwich panel with injection of 5 cm polyurethane material with allozinc sheet
جنس کف		ST- ST-37 smooth steel sheet with a thickness of 3 mm / plain and ribbed ST
جنس و نوع درب عقب		ST-14 oiled Sandwich panel with injection of 4 cm polyurethane material
ساختار شاسی و قطعات فلزی
پوشش دور درب ها		PVC insulation with special rubber
پوشش دور کلاف درب عقب		Bent sheet to a thickness of 2 mm metal / steel
نوع رنگ سازه		Car oil paint
یراق آلات		Steel / Galvanized
پوشش زیر اتاق		According to customer’s order (metal / fiberglass)
ابعاد خارجی	طول/متر	2.35
	عرض/متر	1.70
	ارتفاع/متر	1.70
ابعاد داخلی	طول/متر	2.27
	عرض/متر	1.62
	ارتفاع/متر	1.66
وزن ناخالص	کیلوگرم	3800
وزن اتاق	کیلوگرم	500
وزن شاسی	کیلوگرم	1540
وزن بدون بار ±	کیلوگرم	1760
حجم مفید	متر مکعب	5.5
مناسب برای خودروهای		Nissan
کاربرد صنایع		Food Distribution Industries
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Health Pass

General introduction of Shayan’s Health Pass

Shayan User Group has designed an innovative and attractive product so that you can quickly disinfect your car, hands, and clothes. This elegant product is called “Health Pass” and operates entirely automatically and professionally. Shayan Health Pass is designed as a standard-size tunnel and has two different types. 1) general disinfection tunnel and 2) car disinfection tunnel.

general disinfection tunnel

This health tunnel or passage has valves and nozzles in different angles (top, bottom, and sides) that spray automatic disinfectants (in the form of mist) when a person passes entirely automatically. In a general disinfection tunnel, when a person enters it, the sensors of this device are activated, and they spray disinfectants from different angles. This health passage works best even when a person is crossing and disinfects the entire surface of clothing and shoes. In addition, Shayan Public Disinfection Tunnel is equipped with an automatic tank for hand disinfection. All you have to do is place your hands in front of this tank and disinfect them without touching any buttons or pedals. This tank has a sensor, and as soon as the needles are in front of it, it starts spraying the disinfectant solution. In this way, all your clothes, shoes, and hands are disinfected by passing through the health passage, and within a few seconds, you can enter your home or workplace safely.

car disinfection tunnel

Shayan Company also has another product named car disinfection tunnel. Manually disinfecting a car is more complex and time-consuming than general disinfection, which is why using a decent tunnel or health passage is very practical and helpful these days. The car disinfection tunnel also has a mechanism similar to a general disinfection tunnel, and when the car enters, it automatically sprays disinfectants. This device also starts spraying disinfectants from different angles when passing the vehicle (moving car).this is done when washing the vehicle in the form of a spray and at the time of stopping or normal movement in the form of a whole bouquet. Your vehicle will be disinfected and cleaned in a few seconds without any hassle with this product.

Features and technical specifications of Shayan’s Health Pass

The question that may arise for you is: where is the source of the supply of disinfectants in this product? Shayan Health Tunnel has a large tank with a capacity of 100 liters of disinfectant, which is installed on the outside and can be easily recharged. After the disinfection solution is complete, you can fill it.

This product disinfects all the surfaces thoroughly. This tunnel is beneficial for offices and companies that have many employees. By purchasing it, you can ensure the health of yourself and your employees and work in a completely safe environment and contribute to your health and the community’s general health.

The technical specifications of Shayan’s Health Pass:

Professional and fully automatic performance
Complete disinfectant when crossing the tunnel
Having spray nozzles at different angles
Optimal use of disinfectants according to sensory sensors
Dimensions and small volume and can be used in different places and corridors
Used in open spaces and rain tolerance
Quick run and startup
Having a 100 liter tank of disinfectants
High speed fog
Disinfectant property in normal passage of pedestrians and vehicles through the tunnel
Automatic hand disinfection system
Observance of safety standards to maintain people’s health
Reasonable and affordable price

These practical features have been applied accurately by the professional staff of this company in Shayan Health Pass. Apart from offices and indoor environments, this health crossing can also be used in military settings and is sufficiently resistant to cold, heat, and rain and does not cause any problems. This fully automatic device is designed with all safety principles and is reasonably priced due to its unique capabilities. In addition, the amount of disinfectant sprayed on this health passage is sufficient, and the use of disinfectants is very optimal and appropriate. Therefore, if you spend a lot of time and disinfection to disinfect your work environment or personal home, it is better to try Shayan Health Pass and safely leave your surface disinfection to this fully automatic and practical device.

Refrigerated containers below zero and above zero

Types of container

Container units are one of the essential parts of the entire global transportation industry and trade. These transport chambers are structures of various types. Different types of containers are defined and designed with the kind of load. The design of each of them is such that it will assure you that the product will reach its destination in perfect health. Similarly, depending on the type of goods being shipped or the special services used, container units may vary in size, structure, material, builders, and so on. It is good to know that each group builds a container with its design and idea in the room building industry.

What is Refrigerated container

One of the most popular types of containers is the refrigerated container. This type of container is mainly used to transport temperature-controlled shipments of fruits, meat, fish, seafood, vegetables, dairy products, ice cream, and non-food products such as flowers and medicine over very long distances or intercity. This type of container comes in various sizes and technologies, but almost all of them are standard 20-foot units, which is the standard size. Note that this type of container is not designed to reduce the cargo temperature but to maintain the pre-cooled load temperature.

Benefits of Refrigerated containers

It is good to know that refrigerated containers can maintain or reduce the temperature of your product even in the most challenging conditions. There are many benefits to using this type of container for commodity owners. For example, imagine that your perishable goods are in a container and there is a delay in reaching the destination; Despite the adequate cooling and standard of the container, you can be sure of the health of your goods during the delay period.

Important points of load carrying in a refrigerated container

Observing the following points will maintain more satisfaction when using the refrigerated container.

In the case of cold loads, air must be transported through the cargo at all times to dissipate heat and gases, so the cartons used must be ventilated.
Cargo should not be filled more than the bottom of the floor.
Cargo should not be overfilled.
The user compartment must always be adjusted to the proper transport temperature.
Thermometer device controls should be checked.

Shayan’s Refrigerated containers

Shayan Group, which has more than half a century of experience in the truck and van construction industry, offers one of the best types of refrigerated containers on the market. Container Shayan is proud to offer one of the highest quality refrigerated containers to the market by reducing the extra weight of the room and increasing the loading level of the goods. Shayan refrigerated containers are generally suitable for Isuzu, Faw, Amico, Fuso, and Schiller. One of the positive points of this container is its body and floor material, which is made of a sandwich panel with an injection of polyurethane material. PVC insulation with unique rubber around the container doors will reduce cold wastage and thus save energy and costs. Due to the facilities available in the Shayan production line, it is possible to order unique bodies with high-strength fiberglass materials. This type of chassis in the new use of the refrigerator is another feature of the Shayan complex that will have high resistance.

Concluding remarks on refrigerated containers

With the development of the transportation industry, we have witnessed the emergence of containers in recent years. One of the most important containers in the transportation industry is the refrigerated container. This type of container is designed and produced to maintain the health and quality of perishable materials. Of course, keep in mind that it is essential to observe the crucial points in preserving the quality of the product. Shayan Group has taken a big step in the room-making industry by designing and producing various light and high-quality containers. One of the essential advantages of using the Shayan refrigerator is its warranty and after-sales service. Although rising dollar prices and sanctions have put double pressure on the group, it will continue to work with room building and high team spirit.

نام تجاری محصول
کد محصول		SH-RFG-110	SH-RFG-114	SH-RFG-115
نام فنی محصول		Refrigerator sandwich panel
مشخصات فنی
جنس بدنه		Sandwich panel with injection of 8 cm polyurethane material
جنس کف		Sandwich panel with injection of polyurethane material and Rail aluminum / steel sheet / steel / ribbed aluminum
جنس و نوع درب عقب		Sandwich panel with injection of 9 cm polyurethane material
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber
نوع رنگ (آستر + اصلی)		Car oil paint
یراق آلات		steel
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	4,900	5,800
	عرض	1,950	2,200	2,200
	ارتفاع	2,000	2,300	2,200
ابعاد داخلی (میلی متر)	طول	3,040	4,740	5,640
	عرض	1,790	2,040	1,920
	ارتفاع	1,780	1,980	1,980
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	900	1,600	1,800
وزن شاسی	کیلوگرم	1,800	2,700	2,800
وزن بدون بار ±	کیلوگرم	2,500	1,700	3,400
حجم مفید	متر مکعب	10	19	22
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai- kaviyan
کاربرد صنایع		Carrying frozen dairy, carrying ice cream, carrying meat, carrying frozen chicken
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Maps Refrigerated containers below zero and above zero

Floor container

Technical specifications of Floor container

Shayan’s floor container coil is made of ST-37 steel, and a 3 mm steel sheet is used for its floor. The chassis structure of This product is made of ST-37 steel parts and sections, and its columns are bent 3 mm metal sheet. In designing and manufacturing fittings, tow wire, wire collector, and steel hooks are used, and the color used for the roof container is high-quality oil paint of the car.

This container is designed in three different tonnages of 5, 6, and 8 tons; each tonnage has its capabilities and dimensions. These three tonnages are very practical, and you can choose one of them for transportation based on the type of load, volume, and height.

Shayan 5 ton floor container has external dimensions (3,200 mm length, 1,950 mm width and 1,700 mm crown height) and internal dimensions (3,200 mm length and 1,950 mm width). The gross weight of this 5-ton product is about 5200 kg, and its room weight is 400 kg. The weight of the chassis used in this metal body is 1800 kg, and the weight without load is 3000 kg.

Shayan 6-ton floor container has external dimensions (4,900 mm length, 2,200 mm width and 1,700 mm crown height) and internal dimensions (4,900 mm length and 2,200 mm width). The gross weight of this 6-ton product is about 6,000 kg, and its room weight is 520 kg. The weight of the chassis used in this metal container is 2,700 kg, and its weight without load is 2,780 kg.

Finally, the Shayan 8-ton floor container has external dimensions (5,800 mm long, 2,200 mm wide, and 1,700 mm high crown) and internal dimensions (5,800 mm long and 2,200 mm wide). The gross weight of this 8-ton product is about 8,000 kg, and its room weight is 700 kg. The weight of the chassis used in this metal container is 2,800 kg, and its unladen weight is 4,500 kg.

The Shayan floor container is convenient and excellent for installing cars such as Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai. As mentioned earlier, this product is a very suitable option widely used in transportation due to the lack of walls around it for transporting and moving all kinds of machines, vehicles, and hardware. The floor container also transports loads with non-standard dimensions, volume, and height, and this container is considered the basis of transport rooms. Custom equipment of this product can also include items such as toolbox, flower dispenser, spare strap, battery protection, money box, lighting, arm guard, shield, windshield and sun visor, shock absorber, extra door, fuel tank, refrigerator, the water source, and the ladder.

نام تجاری محصول
کد محصول		SH-FLT-110	SH-FLT-114	SH-FLT-115
نام فنی محصول		Floor container
مشخصات فنی
جنس بدنه		–
جنس کلاف کف		ST-37 bent steel parts and sections
جنس کف		3 mm steel sheet
ستون ها		Bent from 3 mm sheet
جنس و نوع درب عقب		–
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		–
نوع رنگ (آستر + اصلی)		Car oil paint
یراق آلات		Tow wires and wire gathers and steel hooks
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	4,900	5,800
	عرض	1,950	2,200	2,200
	ارتفاع	–	–	–
	Crown height	1,700	1,700	1,700
ابعاد داخلی (میلی متر)	طول	3,200	4,900	5,800
	عرض	1,950	2,200	2,200
	ارتفاع	–	–	–
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	400	520	700
وزن شاسی	کیلوگرم	1,800	2,100	2,800
وزن بدون بار ±	کیلوگرم	3,000	2,780	4,500
حجم مفید	متر مکعب	–	–	–
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Carrying heavy and mineral loads
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Floor User Maps

Poultry transport container

Technical Specifications of Poultry transport container

The material of the Shayan’s Poultry transport container is ST-14 oiled steel sheet with a thickness of 1.5 mm, and the dimensions of its body cans are 30×40 and 40×40. The floor of this grid is made of ST-37 ribbed steel sheet with a thickness of 3 mm, and its columns are bent columns of a 2 mm sheet. The material and type of rear door of this poultry carrier net are also made of ST-14 oiled steel sheet with a thickness of 1.5 mm.

The chassis structure and its metal parts are ST-37 steel, making this container very strong and durable against impact. The cover around the doors of this Poultry transport container is coiled profiles. Also, the type of paint used is a car oil painting, which is very high-quality paint. Also, all welds are of CO2 type.

Shayan’s Poultry transport container is made in two cargoes of 6 and 8 tons, each of which has different dimensions, and you can choose one of them according to your load.

Shayan’s Poultry transport 6-ton container’s external dimensions are 5250 mm long, 2220 mm wide, and 2360 mm high, and internal dimensions are 5170 mm long, 2140 mm wide, and 2280 mm high. The 6-ton container has 1960 boxes, and the 8-ton container has 2120 boxes, which can be easily placed in it.

The gross weight of this 6-ton container is about 6000 kg, and the weight of its room is 1230 kg. The weight of the chassis used in this metal application is 2700 kg, and its weight without load is 2070 kg. Its practical volume is 26 cubic meters.

However, the Shayan’s Poultry transport 8-ton container has external dimensions (6000 mm long, 2220 mm wide, and 2360 mm high) and internal dimensions (5920 mm long, 2020 mm wide, and 2240 mm high). The number of boxes in it is 2120, which can be easily placed in this container. The gross weight of this 8-ton container is about 8000 kg, and the weight of his room is 1300 kg. The weight of the chassis used in this metal application is 2800 kg, and its weight without load is 3900 kg. Its proper volume is 29 cubic meters.

Shayan’s Poultry transport container’s room is very suitable and practical for installing cars such as Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai. Custom equipment of this grid user can also include items such as toolbox, flower spreader, spare strap, battery protection, money box, lighting types, arm guard, shield, windshield and sun visor, shock absorber, fuel tank, refrigerator, source Mention water, and ladders. Therefore, if you are looking for an ideal and practical container for carrying your poultry loads, Shayan’s Poultry transport container in two cargoes of 6 and 8 tons and with a different number of boxes is the best option for you.

Product brand Name
Product Code			SH-RCK-114	SH-RCK-115
Technical product name		Poultry transport container
Technical Specifications
Body Material		ST-14 oiled steel sheet with a thickness of 1.5 mm
body can’s Material		cans 40 30 × and 40 × 40
جنس کف		ST-37 brick steel sheet with a thickness of 3 mm
ستون ها		Bent from 2 mile sheet
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		پروفیل های کلافی
نوع رنگ (آستر + اصلی)		رنگ روغنی خودرو
یراق آلات		فلزی
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	–	5250	6000
	عرض	–	2220	2220
	ارتفاع	–	2360	2360
ابعاد داخلی (میلی متر)	طول	–	5170	5920
	عرض	–	2140	2020
	ارتفاع	–	2280	2240
تعداد جعبه		–	1960	2120
وزن ناخالص	کیلوگرم	–	6,000	8,000
وزن اتاق	کیلوگرم	–	1,230	1,300
وزن شاسی	کیلوگرم	–	2,700	2,800
وزن بدون بار ±	کیلوگرم	–	2,070	3,900
حجم مفید	متر مکعب	–	26	29
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Carrying all kinds of poultry, especially live chickens
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder, etc.
Has the standard of safety equipment for freight vehicles 11889

Poultry transport user maps

Metal roofed container Smooth and Shutters

Technical specifications of Metal roofed container

The material and type of the rear door is an ST-14 oiled steel sheet with a thickness of 1.5 mm, which is very strong and durable. The chassis structure and metal parts This metal-roofed container with a shutter body is made of ST-37 parts and steel sections, and the cover around its doors is made of unique rubber and metal with PVC insulation. This room has metal/steel fittings,’ and for its color, we used oil painting of the car.

Metal roofed container of Shayan shutter body has three different tonnages, each of them has different internal and external dimensions. Shayan 5 ton metal container has internal dimensions (3,200 mm length, 1,900 mm width and 2,200 mm height) and external dimensions (3,120 mm length, 1,820 mm width and 2,060 mm height). The gross weight of this car is 5 tons, 5200 kg, its room weight is 760 kg, its chassis weight is 1.800 kg, its loading capacity is 2,640 kg, and the useful volume of this user is 13 cubic meters.

Its 6 ton container has internal dimensions (5,200 mm length, 1,800 mm width and 2,200 mm height) and external dimensions (5,120 mm length, 2,100 mm width and 2,060 mm height). The gross weight of this car is 6 tons, 6000 kg, its room weight is 1260 kg, its chassis weight is 2100 kg, its loading capacity is 2040 kg, and the useful volume of this user is 25 cubic meters.

Shayan 8 ton container also has internal dimensions (6,200 mm length, 2,180 mm width and 2,200 mm height) and external dimensions (6,120 mm length, 2,100 mm width and 2,060 mm height). The gross weight of this car is 8 tons, 8000 kg, its room weight is 1400 kg, its chassis weight is 2300 kg, its loading capacity is 3800 kg, and the useful volume of this user is 30 cubic meters.

Metal roof container with roller shutter body is very suitable and practical for installing cars such as Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai. This metal-roofed use is designed to carry perishable food and cargo within the city, such as furniture. Custom equipment of this container includes tools such as toolbox, flower dispenser, spare strap, battery protection, money box, lighting types, arm guard, shield, windshield, sun visor, shock absorber, extra door, fuel tank, refrigerator, water source, and Note the ladder.

نام تجاری محصول
کد محصول		SH-RMF-110	SH-RMF-114	SH-RMF-115
نام فنی محصول		Metal roofed container with Smooth and Shutters body
مشخصات فنی
جنس بدنه		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس کف		ST-37 flat steel sheet with a thickness of 3 mm
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber / metal
نوع رنگ		Car oil paint
یراق آلات		Metal/ Steel
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	5,200	6,200
	عرض	1,950	2,180	2,180
	ارتفاع	2,200	2,400	2,400
ابعاد داخلی (میلی متر)	طول	3,120	5,120	6,120
	عرض	1,870	2,100	2,100
	ارتفاع	2,140	2,320	2,320
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	820	1,350	1,500
وزن شاسی	کیلوگرم	1,800	2,700	2,800
ظرفیت بارگیری	کیلوگرم	2,580	1,950	3,700
حجم مفید	متر مکعب	13	25	30
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Carrying non-perishable food, carrying city loads
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Maps Metal roofed container Smooth and Shutters

Roofed containe Paneled body

Technical specifications of Paneled container

The body material of the paneled body container is an ST-14 oiled steel sheet with a thickness of 1.5 mm, and the floor material is a plain ST-37 steel sheet with a thickness of 3 mm. The material of the rear door of this application is an ST-14 oiled steel sheet with a thickness of 1.5 mm, and the structure of the chassis and its metal parts are also ST-37 steel parts and sections. These robust steel coatings guarantee the health and safety of your cargo, and the load will reach its final destination with the utmost care and safety with such a durable coating. The covering around the doors is also steel, and its fittings are made of metal. The type of paint used for the roof of the body is the oil painting of the car, which is a very high-quality paint that is not damaged in any way.

The roofed use of the Shayan paneled body container is made in three different tonnages of 5, 6, and 8 tons. The load-carrying capacity of each of them is additional, and you can choose one of these three containers according to your cargo volume.

5-ton roofed paneled container has external dimensions (3,200 mm length, 1,950 mm width and 2,400 mm height) and internal dimensions (3,120 mm length, 1,870 mm width and 2,320 mm height). The gross weight of this 5-ton product is about 5200 kg, and its room weight is 815 kg. The weight of the used chassis is 1800 kg, its loading capacity is 2585 kg, and its useful volume is 13 cubic meters.

6 ton roof paneled container has external dimensions (5,200 mm length, 2,180 mm width and 2,400 mm height) and internal dimensions (5,120 mm length, 2,100 mm width and 2,320 mm height). The gross weight of this 6-ton car is about 6000 kg, and its room weight is 1280 kg. The chassis weight used is 2700 kg, and its loading capacity is 2020 kg, and its useful voluminosity is 25 cubic meters.

The 8-ton container has external dimensions (6,200 mm long, 2,180 mm wide, and 2,400 mm high) and internal dimensions (6,120 mm long, 2,100 mm wide, and 2,320 mm high). The gross weight of this 8-ton car is about 8000 kg, and its room weight is 1420 kg. The weight of the chassis used is 2800 kg, its loading capacity is 3780 kg, and its practical voluminosity is 30 cubic meters.

Shayan paneled body container is very suitable for installing Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai. As we mentioned, it is the best option for transporting furniture and home furnishings and distribution companies on you. From the custom equipment of this roofed application, we can use items such as toolbox, flower dispenser, spare strap, battery protection, money box, various types of lighting, arm guard, shield, windshield and sun visor, shock absorber, extra door, fuel tank, refrigerator, Mention the water source and ladder.

نام تجاری محصول
کد محصول		SH-RMB-330	SH-RMB-334	SH-RMB-335
نام فنی محصول		Metal roofed container with paneled body
مشخصات فنی
جنس بدنه		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس کف		ST-37 flat steel sheet with a thickness of 3 mm
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		Coiled (steel)
نوع رنگ		رنگ روغنی خودرو
یراق آلات		فلزی
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	5,200	6,200
	عرض	1,950	2,180	2,180
	ارتفاع	2,400	2,400	2,400
ابعاد داخلی (میلی متر)	طول	3,120	5,120	6,120
	عرض	1,870	2,100	2,100
	ارتفاع	2,320	2,320	2,320
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	815	1,280	1,420
وزن شاسی	کیلوگرم	1,800	2,700	2,800
وزن بدون بار ±	کیلوگرم	2,585	2,020	3,780
حجم مفید	متر مکعب	13	25	30
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Transportation of home furniture and distribution companies
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Maps Roofed containe Paneled body

Insulated sandwich panel Roofed container

Introduction of Insulated sandwich panel

The characteristics of sandwich panels include their lightness, high strength, low construction and maintenance costs, high installation speed, and resistance to cold and heat.

Features of Shayan insulated roofed container

نام تجاری محصول
کد محصول		SH-RCW-110	SH-RCW-114	SH-RCW-115
نام فنی محصول		Insulated sandwich panel
مشخصات فنی
جنس بدنه		Sandwich panel with injection of 5 cm polyurethane material with allozinc sheet
جنس کف		ST- ST-37 smooth steel sheet with a thickness of 3 mm / plain and ribbed ST
جنس و نوع درب عقب		ST-14 oiled Sandwich panel with injection of 4 cm polyurethane material
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber
نوع رنگ سازه		Car oil paint
یراق آلات		Steel / Galvanized
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	4,900	5,800
	عرض	1,950	2,200	2,200
	ارتفاع	2,100	2,200	2,200
ابعاد داخلی (میلی متر)	طول	3,100	4,800	5,700
	عرض	1,850	2,100	2,100
	ارتفاع	2,050	2,150	2,150
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	800	1,300	1,500
وزن شاسی	کیلوگرم	1,800	2,700	2,800
وزن بدون بار ±	کیلوگرم	2,600	2,000	3,700
حجم مفید	متر مکعب	12	23	27
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Food Distribution Industries
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Insulated sandwich panel user maps

Roofed tented

. One of the technologies that significantly increased the import and export of goods and even slight movements was that the container came to the factory in the budget room. Some companies provided different types of containers to transport various interests in the manufacturing companies of the factory and the market. Shayan Group is one of the successful activists in this industry. Relying on the latest technology globally, this group has built a truck room suitable for all types of cars. Fleet improvement is also one of the services offered by Shayan Group. In this article, we want to introduce you to the metal-roofed container with a shady user group. Stay with us until the end.

Advantages of using containers in the freight industry

First of all, it’s good to know a bit of the benefit of using a container to carry cargo. With the entry of various containers into the freight industry, there was a massive change. After that, the import and export of multiple goods became more and more widespread. But the advantages of using a container in carrying cargo are:

• Reduce the risk of breakage and damage of goods in containers
• Reduce the risk of theft while moving
• Containers are safe from climate change
• Reduce shipping and handling costs
• Significant reduction in the time of delivery of goods or products to the market
• Increase the speed of work in loading and unloading
• Reduce packaging costs

Metal roofed container with tent Shayan user group

Shayan Group metal roofing container with the tent is one of the high-quality products of this company. This container is designed for transporting bulky and light goods, furniture, and moving customs goods. It is interesting to know that designers can implement customers’ custom equipment on each container before producing a container in Shayan Room Building Group. Unfortunately, the production work has been a bit difficult due to the tight embargo and the lack of the required chassis. For this reason, Shayan Group equips and repairs old containers to improve the transportation fleet.

Technical specifications of metal roofed container with tent Shayan user group

Now it is good to pay a little more attention to the technical specifications of the metal roofing container of Shayan Group. First of all, you should know that this truck room is designed and manufactured for use on Isuzu, Faw, Amico, Fuso, and Schiller vehicles. This user’s body and rear door are made of ST-14 oiled steel sheet with a thickness of 1.5 mm. But the bottom of the container is made of a plain ST-37 steel sheet with a thickness of 3 mm. This truck room has concrete columns. The columns are bent and made of a 2-mile sheet. The type of chassis and its metal parts and steel sections are ST-37, high quality. The lid of this container is insulated with PVC with unique rubber. This feature makes it protected against water and soil. We should note that the Shayan User Group, with the initiative of animating tents and side pillars, is customized for interested customers.

What is custom equipment for a metal roofed container with a tent?

Shayan Usage Group changes the existing facilities of the container according to the customer’s needs during the production of the container. This feature is also called product customization.

But the equipment that is custom-made on the product includes a spherical tent, toolbox, diffuser, spare strap, battery protection, money box, lighting guard, bumper, windshield and sunshade, shock absorber, fuel tank, refrigerator, water source, Ladders, and many other custom equipment.

It is good to know that customizing the container has a negligible effect on the product’s final price. If you have purchased this product, it is good to note that Shayan Group will provide the best after-sales service to its customers.

نام تجاری محصول
کد محصول		SH-RCD-110	SH-RCD-114	SH-RCD-115
نام فنی محصول		Roofed tented
مشخصات فنی
جنس بدنه		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس کف		ST-37 plain steel sheet with a thickness of 3 mm
ستون ها		Bent from 2 mile sheet
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm (2 container doors / 1 hinged door)
ساختار شاسی و قطعات فلزی		ST-37 steel parts and sections
کلاف دور درب های بغل		40x40x40 can with 1/5 mile sheet cover (fixed / four doors / six doors)
نوع رنگ		Car oil paint
یراق آلات		فلزی
انواع خودرو بر اساس تناژ		5 تن	6 تن	8 تن
ابعاد خارجی (میلی متر)	طول	3,200	5,200	6,200
	عرض	1,950	2,280	2,280
	ارتفاع	2,400	2,600	2,600
ابعاد داخلی (میلی متر)	طول	3,120	5,120	6,120
	عرض	1,870	2,200	2,200
	ارتفاع	2,280	2,480	2,480
وزن ناخالص	کیلوگرم	5,200	6,000	8,000
وزن اتاق	کیلوگرم	840	1,250	1,325
وزن شاسی	کیلوگرم	1,800	2,700	2,800
وزن بدون بار ±	کیلوگرم	2,560	2,650	3,875
حجم مفید	متر مکعب	14	29	35
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai
کاربرد صنایع		Special for transporting bulky goods
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

maps Roofed tented

Mobile kitchen

Technical Specifications of Shayan’s Mobile kitchen

Shayan’s mobile kitchen is made of 50 mm thick aluminum and steel sandwich panels, and its floor coil is made of ST-37 bent steel parts and sections. The material used to design the floor of this container is a corrugated aluminum sheet or sandwich panel, and its columns are bent columns of 3 mm sheet. The material and type of rear door of this container is a mobile kitchen with a jack, sandwich panel with a thickness of 40 mm, and the chassis structure and its metal parts are ST-37 steel parts and sections. The cover around the doors is PVC insulation with unique and high-quality rubber, and its fittings are made of steel and steel, which has high strength and durability and is very resistant to impact. The paint used for the body of this mobile container is a car oil painting, which is very high quality.

Shayan mobile kitchen container has two tonnages of 5 and 6 tons, and in addition, a light work has been designed for it, each of which has its dimensions and capacities.

Shayan’s 5 kg mobile kitchen container has external dimensions (3,200 mm length, 1,950 mm width, 2,200 mm height and 1,700 mm crown height) and internal dimensions (3,100 mm length, 1,850 mm width and 2,000 mm height) Is. The gross weight of this 5-ton container is about 5,200 kg, and its room weight is 850 kg. The weight of the chassis used in this mobile work is 1,800 kg, and its weight without load is 2,550 kg, and its volume is 11 cubic meters.

But the 6-ton mobile kitchen container has external dimensions (4,900 mm length, 2,200 mm width, 2,200 mm height and 1,700 mm crown height) and internal dimensions (4,800 mm length, 2,100 mm width and 2,000 mm height). ) Is. The gross weight of this 6-ton container is about 6,000 kg, and its room weight is 1,300 kg. The weight of the chassis used in this mobile car is 2,700 kg, and its weight without load is 2,000 kg, and its sound volume is 20 cubic meters.

Shayan mobile kitchen is very suitable and practical for installing cars such as Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai, as well as different types of and vans. As mentioned earlier, this container is for use in various mobile businesses such as fast food, coffee shops, restaurants, and even fruits and vegetables. The best and most ideal option in front of you is that you can quickly leave your cargo in this mobile container.

Its custom equipment is making round metal fenders of installing all kinds of short sandwich panel doors with horizontal and vertical rotations, covering the bottom of the container from metal sheets and rounds of car fenders of installing water source, diesel generator and ladder’s mention the secrets.

نام تجاری محصول
کد محصول		SH-FTP-110	SH-FTP-114	–
نام فنی محصول		Mobile kitchen
مشخصات فنی
جنس بدنه		Sandwich panel with a thickness of 50 mm / aluminum / steel
جنس کلاف کف		ST-37 bent steel parts and sections
جنس کف		50 mm thick sandwich panel with ribbed aluminum surface
ستون ها		Bent from 3 mm sheet
جنس و نوع درب عقب		Sandwich panel with a thickness of 40 mm
ساختار شاسی و قطعات فلزی		ST-37 bent steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber
نوع رنگ (آستر + اصلی)		Car oil paint
یراق آلات		Steel/metal
انواع خودرو بر اساس تناژ		5 تن	6 تن	–
ابعاد خارجی (میلی متر)	طول	3,200	4,900	–
	عرض	1,950	2,200	–
	ارتفاع	2,200	2,200	–
	Crown height	1,700	1,700	–
ابعاد داخلی (میلی متر)	طول	3,100	4,800	–
	عرض	1,850	2,100	–
	ارتفاع	2,000	2,000	–
وزن ناخالص	کیلوگرم	5,200	6,000	–
وزن اتاق	کیلوگرم	850	1,300	–
وزن شاسی	کیلوگرم	1,800	2,700	–
وزن بدون بار ±	کیلوگرم	2,550	2,000	–
حجم مفید	متر مکعب	11	20	–
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai- kaviyan
کاربرد صنایع		Mobile occupations such as: fast food, fruits and vegetables, cafes and…
تجهیزات سفارشی		Construction of round metal fenders, the possibility of installing all kinds of short sandwich panel doors with horizontal and vertical rotations, the under-use cover of metal sheet and a round of car fenders, the possibility of installing water source, diesel generator and hidden ladders
Has the standard of safety equipment for freight vehicles 11889

Mobile repair atelier

Technical Specifications of Shayan’s Mobile repair atelier

The coil material of the Shayan mobile repair atelier is made of ST-37 steel parts and sections, and the material worked on the floor is a 3 mm steel sheet, which is very strong and durable. The structure of this container’s chassis and metal parts is made of ST-37 steel parts and sections, and in the construction of its fittings, tow wire, wire collector, and steel hooks have been used. It is a car that is a very high-quality color.

Shayan Mobile repair atelier has two tonnages of 5 and 6 tons, and in addition, a light work has been designed for it, each of which has its dimensions and capacities.

The 5-ton container of the Shayan repair atelier has external dimensions (3,200 mm length, 1,950 mm width, and 2,100 mm height) and internal dimensions (3,120 mm length, 1,850 mm width, and 2,000 mm height). The gross weight of this 5-ton product is about 5,200 kg, and its room weight is 530 kg. The weight of the chassis used in this container is 1,800 kg, its weight without load is 2,870 kg, and the helpful volume of this container is 12 cubic meters.

The 6-ton container of Shayan Repair atelier Atelier has external dimensions (4,900 mm length, 2,200 mm width, and 2,200 mm height) and internal dimensions (4,800 mm length, 2,100 mm width, and 2,100 mm height). The gross weight of this 6-ton product is about 6,000 kg, and its room weight is 1,600 kg. The weight of the chassis used in this container is 2,700 kg, its unladen weight is 1,700 kg, and the helpful volume of this user is 22 cubic meters.

Shayan mobile repair atelier is very suitable and excellent for installing cars such as Isuzu, Faw, Amico, Fuso, Schiller, Alvand, Kavian, and Hyundai. This means that you can install this mobile container on these cars and take it wherever you want. Having this mobile repair atelier as a repairman, technician, or engineer, you can have the parts and equipment you need with you everywhere. Custom equipment of this container can include items such as toolbox, flower spreader, spare strap, battery protection, money box, lighting, arm guard, shield, windshield and sun visor, shock absorber, extra door, fuel tank, refrigerator, Mention the water source and the ladder.

نام تجاری محصول
کد محصول		SH-FTP-210	SH-FTP-210	–
نام فنی محصول		Mobile repair atelier
مشخصات فنی
جنس بدنه		Sandwich panel with a thickness of 40 mm
جنس کلاف کف		ST-37 bent steel parts and sections
جنس کف		3 mm sheet smooth / ribbed / polyurethane injection
ستون ها		Bent from 3 mm sheet
جنس و نوع درب عقب		Fiberglass / sandwich panel / shutters
ساختار شاسی و قطعات فلزی		ST-37 bent steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber
نوع رنگ		رنگ روغنی خودرو
یراق آلات		Surface and built-in hinges and handles
انواع خودرو بر اساس تناژ		5 تن	6 تن	–
ابعاد خارجی (میلی متر)	طول	3,200	4,900	–
	عرض	1,950	2,200	–
	ارتفاع	2,100	2,200	–
ابعاد داخلی (میلی متر)	طول	3,120	4,800	–
	عرض	1,850	2,100	–
	ارتفاع	2,000	2,100	–
وزن ناخالص	کیلوگرم	5,200	6,000	–
وزن اتاق	کیلوگرم	530	1,600	–
وزن شاسی	کیلوگرم	1,800	2,700	–
وزن بدون بار ±	کیلوگرم	2,870	1,700	–
حجم مفید	متر مربع	12	22	–
مناسب برای خودروهای		Isuzu – Faw – Amico – Fuso – Schiller – Kavian – Alvand – Hyundai- kaviyan
کاربرد صنایع		Mobile jobs such as: oil change, mobile repair shop and…
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889

Bladed container from the chassis

Bladed container from the chassis is one of the different types of containers, the load part is divided into two equal parts by a longitudinal blade or a wall. This type of container, whose cargo is divided into two separate parts, is called a lightweight container. This product is very suitable for carrying all kinds of liquids and is one of the most widely used room buildings in transportation.

The two-part lightweight container room helps separate the cargo that is being transported, and the cargo carrier can quickly load and separate the products from two different places in his truck. Bladed container from the chassis is generally very suitable for transporting mineral water, soft drinks, juices, or any other product transported in liquid and bottled form. This product is one of the best types of Bladed containers that will deliver your loads to their destination with complete accuracy and health.

Technical Specifications of Bladed container from the chassis

The material of the body of this lightweight container with the blade is an ST-14 oily steel sheet with a thickness of 2 mm. The floor material is a plain ST-37 steel sheet with a thickness of 3 mm, which has high strength and resistance and is completely safe for carrying liquid products. And for sure. The material of the side doors is made of aluminum or galvanized type according to your taste, which can have 2 to 4 entries. The windbreak material in front of this blade user is a 1.5 mm sheet with a frame of 30 * 30. The room cover is a bent steel sheet with a thickness of 2 mm, and the body under the room can be metal or fiberglass according to your order. The chassis structure and metal parts This type of container is ST-52 steel parts and sections, which is one of the essential factors in its strength and strength. The color of the blade-bearing container is the oil color of the car, and its fittings are made of metal.

External dimensions of the Bladed container from the chassis are 2.50 meters long, 1.70 meters wide, and 1.70 meters high. Its internal dimensions are 2.42 meters long, 1.62 meters wide, and 1.62 meters tall. The gross weight of this bladed container is 3800 kg, its room weight is between 350 to 400 kg, its chassis weight is 1540 kg, its unladen weight is between 1910 to 1860 kg, and its helpful volume is 6 cubic meters. Bladed container from the chassis is designed to install cars such as Nissan, Mazda single-cab, and single-cab pickup. It is efficient and suitable for carrying a variety of liquids, including soft drinks and mineral water. Custom equipment of this product includes equipment such as money box, lighting, rear bumper, shock absorber, extra door, ladder, taillight, and sticker on the body.

نام تجاری محصول
کد محصول	SH-DDR-V20
نام فنی محصول	Bladed container from the chassis
مشخصات فنی
جنس بدنه	ST-14 oiled steel sheet with a thickness of 2 mm
جنس کف	ST-37 plain steel sheet with a thickness of 3 mm
جنس و نوع درب های بغل	According to customer’s order (aluminum / galvanized) – 2 doors to 4 doors
جنس بادشکن جلو	according to the order(1.5 mm sheet with 20 * 30 skeleton)
ساختار شاسی و قطعات فلزی	ST-52 steel parts and sections
پوشش دور اتاق	Bent steel sheet 2 mm thick
نوع رنگ	رنگ روغنی خودرو
پوشش زیر اتاق	According to customer’s order (metal / fiberglass)
ابعاد خارجی	طول/متر	2.50
	عرض/متر	1.70
	ارتفاع/متر	1.70
ابعاد داخلی	طول/متر	2.42
	عرض/متر	1.62
	ارتفاع/متر	1.62
وزن ناخالص	کیلوگرم	3800
وزن اتاق	کیلوگرم	350-400
وزن شاسی	کیلوگرم	1540
وزن بدون بار ±	کیلوگرم	1910-1860
حجم مفید	متر مکعب	6
مناسب برای خودروهای	Nissan
کاربرد صنایع	Carrying soft drinks and mineral water
تجهیزات سفارشی	Box of money, all kinds of lighting, rear bumper, bumper, extra door, ladder, taillight, sticker on the body and…
Has the standard of safety equipment for freight vehicles 11889

Fabric roofed container with shutters from the floor

Introduction of Fabric roofed container with shutters from the floor

This product also has the standard of 11889 freight vehicle safety equipment. The code of this product was SH-RMB-V01.

Technical Specifications of Fabric roofed container with shutters from the floor

Shayan Group has made every effort to use the best materials and equipment available in constructing the container. This feature has increased their durability as well as customer satisfaction.

The body of this container is made of an ST-14 oiled steel sheet with a thickness of 1.5 mm. According to the order, its floor is also made of a 2-mm bent galvanized sheet. ST-14 greased steel sheet with a thickness of 1.5 mm is also considered for the tailgate. According to the customer’s order, it is good to know that a 1.5 mm sheet with 20 x 30 framing is used as a windbreak in this product. Round doors have PVC insulation with unique rubber/metal. All fittings are metal pressed. Car oil paint has been used as a paint primer for lightweight roofed containers. This product is produced for use on Nissan cars.

The dimensions of Fabric roofed container with shutters from the floor

The dimensions of this product have very suitable for carrying cargo and transportation within the city. Its external dimensions are as follows: length 2.35 meters, width and height 1.70 meters. But the outer dimensions of this container are designed as follows: length 2.35 meters, width 1.65, and height 2.05. Its gross weight is 3800 kg, and room weight is 450 kg. The chassis weight of this product is 1540 kg, and its unladen weight is 1710 kg. This container has a volume of 6 cubic meters.

Custom equipment

Shayan Company’s design team according to customer needs; customizes the container for consumers. But some of the custom equipment that you can install on your lightweight refrigerated container include money box, lighting fixtures, rear bumper, ladder, extra door, body sticker taillight, hinged and sliding tailgate, and many other customs.

نام تجاری محصول
کد محصول		SH-RMB-V01
نام فنی محصول		Fabric roofed container with shutters from the floor
مشخصات فنی
جنس بدنه		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس کف		according to the order / Bended 2 galvanized sheet
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس بادشکن جلو		according to the order(1.5 mm sheet with 20 * 30 skeleton)
پوشش دور درب ها		PVC insulation with special rubber/ metal
نوع رنگ		رنگ روغنی خودرو
یراق آلات		Steel Press
ابعاد خارجی	طول/متر	2.35
	عرض/متر	1.70
	ارتفاع/متر	1.70
ابعاد داخلی	طول/متر	2.27
	عرض/متر	1.62
	ارتفاع/متر	1.62
وزن ناخالص	کیلوگرم	3800
وزن اتاق	کیلوگرم	450
وزن شاسی	کیلوگرم	1540
وزن بدون بار ±	کیلوگرم	1710
حجم مفید	متر مکعب	6
مناسب برای خودروهای		Nissan
کاربرد صنایع		Carrying dry cargo in and out of the city
تجهیزات سفارشی		Money box, lighting, stickers on the body, hinged side door and…
Has the standard of safety equipment for freight vehicles 11889

Roofed container with shutters from chasis

Introduction of Roofed container with shutters from chasis

One of the best containers of Shayan Company is the Roofed container with shutters from chassis. This product has significantly facilitated the transportation and movement of incorruptible goods within the city. It is good to know that this high-quality container received the standard of 11889 freight vehicle safety equipment. This product is known in the Shayan group by the code SH-RMB-V20. In the following, we will acquaint you with its technical specifications. You can use this container on a Nissan car.

Technical Specifications of Roofed container with shutters from chasis

As an experienced room-building group, Shayan Company has been serving the people for more than half a century. Customer satisfaction indicates the high quality of materials and tools used. Roofed container with shutters from chassis is one of the best-selling containers.

The material of the body is an ST-14 oiled steel sheet with a thickness of 1.5 mm. The design of this product series is a plain ST-37 steel sheet with a thickness of 3 mm for its floor. According to the customer’s order, this container uses a 1.5 mm sheet with 20 * 30 framing as a windbreak. Also around the doors are PVC insulation with unique rubber/metal. All fittings are made of press metal. Chassis and metal parts This product is made entirely of ST-52 steel parts and sections. The room’s perimeter is completely covered with a 2 mm thick bent steel sheet, and the customer orders the basement with metal/fiberglass. As a liner, this container is painted with car oil painting.

The dimensions of Roofed container with shutters from chasis

The experienced designers of Shayan Company have considered the user-friendly dimensions for this product to be suitable for installation on Nissan cars. With this container, you can quickly move all non-perishable food and goods in the inner city. But the external dimensions of this product are as follows: length 2.50 meters, width and height 1.70 meters. Its internal dimensions are length 2.38 meters, width 1.62 meters, and height 1.60 meters. Its gross weight is 3800 kg, and room weight is 550 kg. Also, the chassis weight of this container is estimated at 1540 kg, and its unladen weight is estimated at 1710 kg. This container has a volume of 6 cubic meters.

Custom equipment

Shayan Company has customized its products to satisfy the customer as much as possible. It means that you, as the consumer, can have all the equipment you need on your container. All you have to do is order the items you need from your professional design team. But some of the custom equipment you can install on this product are money box, lighting types, rear bumper, ladder, extra door, tail light, body tag, hinged and sliding back door, and many other custom items.

نام تجاری محصول
کد محصول		SH-RMB-V20
نام فنی محصول		Roofed container with shutters from chasis
مشخصات فنی
جنس بدنه		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس کف		ST-37 plain steel sheet with a thickness of 3 mm
جنس و نوع درب عقب		ST-14 oiled steel sheet with a thickness of 1.5 mm
جنس بادشکن جلو		according to the order(1.5 mm sheet with 20 * 30 skeleton)
ساختار شاسی و قطعات فلزی		ST-52 steel parts and sections
پوشش دور درب ها		PVC insulation with special rubber/ metal
نوع رنگ		رنگ روغنی خودرو
یراق آلات		Metal Press
پوشش زیر اتاق		According to customer’s order (metal / fiberglass)
ابعاد خارجی	طول/متر	2.50
	عرض/متر	1.70
	ارتفاع/متر	1.70
ابعاد داخلی	طول/متر	2.38
	عرض/متر	1.62
	ارتفاع/متر	1.60
وزن ناخالص	کیلوگرم	3800
وزن اتاق	کیلوگرم	550
وزن شاسی	کیلوگرم	1540
وزن بدون بار ±	کیلوگرم	1710
حجم مفید	متر مکعب	6
مناسب برای خودروهای		Nissan
کاربرد صنایع		Carrying non-perishable food, carrying city loads
تجهیزات سفارشی		Money box, lighting, rear bumper, bumper, extra door, ladder, taillight, sticker on the body, hinged and sliding side door and…
Has the standard of safety equipment for freight vehicles 11889

Light Refrigerated Container

Introducing Shayan’s light refrigerated container

. These two refrigerated light containers are sub-zero refrigerated soft containers and above zero refrigerated safari containers. It is good to know that both of these products have a 11889 freight vehicle safety equipment standard. Here we have tried to acquaint you with the technical specifications of each of them.

Introducing the sub-zero light refrigerated container

As the name implies, the sub-zero lightweight refrigerated container contains a special refrigerator to keep the ambient temperature below zero degrees. This container is designed and produced in the room industry as a suitable solution for transporting perishable goods or goods that need many colds. In general, this particular container for carrying goods such as meat, poultry, medicine, dairy products, ice cream, and all foods that can spoil at temperatures above zero is produced in the Shayan container group.

Top-zero light refrigerated container

Light refrigerated containers above zero are also designed and manufactured to maintain the ideal temperature for foodstuffs in the Shayan Group. But the difference with lightweight sub-zero refrigerated containers is in the type and temperature of the refrigerator. This type of container is used to transport fruits and vegetables, fresh meat and poultry, dairy products, various medicines, and many perishable foods that do not require sub-zero temperatures or freezing points.

Technical Specifications of Light refrigerated container

As we have said, Shayan company has made the highest quality containers with high accuracy and sensitivity. It is good to know that the technical specifications of the sub-zero and above-zero refrigerated light containers are similar. The only difference is the type of refrigerator and their temperature. Therefore, the following technical specifications apply to both of these containers.

The material body and roof are made of a sandwich panel with a thickness of 8 cm with 0.6 allogenic sheets. Also, the fabric of their floor is made of a sandwich panel with a thickness of 10 cm. It is good to know that their floor has an aluminum rail cover. Their rear doors are double-sided, and their material is made of a sandwich panel with a thickness of 7 cm with 0.6 allogenic sheets. Both of these containers have a very high-quality chassis. The chassis structure and the type and their metal parts are made of ST-52 steel parts and sections. The presence of bent steel sheets with a thickness of 2 mm around their doors has maintained the quality of the product and has a shallow energy loss. Shayan Group has used galvanized steel for the fittings of these products. These lightweight containers are designed for the Nissan car.

Dimensions of lightweight refrigerated container

The sub-zero and top-zero refrigerated light containers are also quite similar in terms of dimensions. The external dimensions of these containers are as follows: length 2.35 meters, width 1.70 meters, height 1.70 meters. But the internal sizes of these light containers are produced as follows: length 2.20, width 1.56, height 1.53. Its gross weight is 3800 kg, and the weight of the room is 600 kg. The chassis weight of both light containers is 1660 kg, which is one of the highest quality in terms of material. But they have a volume of about 5.5 cubic meters.

Custom equipment

نام تجاری محصول
کد محصول		SH-RFG-V20
نام فنی محصول		Light Refrigerated Container
مشخصات فنی
جنس بدنه		8 cm thick sandwich panel with 0/6 allozinc sheet
جنس کف		10 cm thick sandwich panel with aluminum rail cover
جنس و نوع درب عقب		Double leaf, sandwich panel with a thickness of 7 cm with Aluzink sheet 0.6
جنس سقف		8 cm thick sandwich panel with 0/6 allozinc sheet
ساختار شاسی و قطعات فلزی		ST-52 steel parts and sections
پوشش دور اتاق		Bent steel sheet 2 mm thick
نوع رنگ شاسی و دور کلاف		Car oil paint
یراق آلات		Steel / Galvanized
پوشش زیر اتاق		According to customer’s order (metal / fiberglass)
ابعاد خارجی	طول/متر	2.35
	عرض/متر	1.70
	ارتفاع/متر	1.70
ابعاد داخلی	طول/متر	2.20
	عرض/متر	1.56
	ارتفاع/متر	1.53
وزن ناخالص	کیلوگرم	3800
وزن اتاق	کیلوگرم	600
وزن شاسی	کیلوگرم	1540
وزن بدون بار ±	کیلوگرم	1660
حجم مفید	متر مکعب	5.5
مناسب برای خودروهای		Nissan
کاربرد صنایع		Carrying perishable food, carrying meat and poultry, carrying medicine and ice cream and dairy
تجهیزات سفارشی		Tool box, flower spreader, spare strap, Battery protector, light box, arm guard, bumper, windshield and sun visor, shock absorber, fuel tank, refrigerator, water source, ladder and…
Has the standard of safety equipment for freight vehicles 11889